Pullner Desalination SWRO plant High Flow Pleated Filter Cartridge 5 Micron 40 Inch Beta 5000
General Information
PHFL Pleated Filter Cartridge series high flow filter cartridge is made of diameter 6inch(152mm), single open end, without inner core, pleated type with inside to outside flow direction. All connection use thermal welding. Large diameter, big filtration area provide high flow rate, highly efficient particle filtration in RO pre-filtration system. Widely used in seawater desalination and power plant condensate polishing water RO pre-filtration.
Features and Benefits:
* Inside to outside flow direction keeps all of the contamination catched;
* Gradient aperture deep polypropylene fiber filter media, aperture along the fluid motion direction becomes smaller, levels intercept different sizes particles, which has excellent dirt holding capacity and low flow resistance.
* 40” outer cage is one piece, with high strength can withstand one adult weight, ensure big effective filtration area, long life;
* Easy installation save, less cartridge change out help customers save the labor cost;
* Integral support, high strength, high dirt holding capacity, long service life;
* Single cartridge could achieve flow rate 110m3/h;
* Filtration efficiency reach 99.8%;
* Strict quality control system, complete production process flow;
* Short delivery period;
* Free technical support;
* MOQ 1 piece;
* FREE sample.
Applications:
General Purpose: RO Pre-filtration, all kinds process water purification;
Petrochemical: Various solvents, chilled water, brine filtration;
Power Plant: supplementary water, condensate water, coolant.
Industrial filtration: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Dimensions(nominal)
| OD | 6inch (152mm) |
| Length | 20inch(508mm), 40inch(1016mm), 60inch(1524mm) |
Material of Construction:
| Model | Filter Media | Support/Drainage | End Caps | Seals Material |
| PP | Pleated depth | Polypropylene | Glass Fiber Reinforced Polypropylene |
NBR, Silicone, EPDM, Viton
|
| PP | Melt blown | / | Glass Fiber Reinforced Polypropylene |
Flow Characteristics:
| Length (inches) | Design Flow Rate (m3/hr) | Max. Flow Rate (m3/hr) | Filtration Area (m2) |
| 20" | 15 | 30 | 3.2 |
| 40" | 20 | 60 | 6.5 |
| 60" | 45 | 90 | 9.5 |
Retention efficiency Table
| Scope of particles | Filtration Efficiency |
| 0.8μm | 1.0μm | 2.0μm | 3.0μm | 5.0μm | 10μm | 20μm |
| ≥1μm | 99.89% | 99.82% | 95.00% | 86.97% | 79.86% | 42.23% | 24.38% |
| ≥2μm | 99.97% | 99.87% | 98.64% | 96.84% | 90.09% | 70.49% | 40.09% |
| ≥5μm | 100.0% | 99.93% | 99.90% | 99.89% | 99.89% | 99.89% | 99.89% |
| ≥8μm | 100.0% | 100.0% | 99.97% | 99.20% | 98.88% | 95.25% | 82.42% |
| ≥10μm | 100.0% | 100.0% | 100.0% | 99.58% | 98.39% | 98.18% | 89.42% |
| ≥12μm | 100.0% | 100.0% | 100.0% | 99.78% | 99.57% | 98.76% | 97.41% |
| ≥25μm | 100.0% | 100.0% | 100.0% | 100.0% | 100.0% | 99.34% | 99.14% |
Pullner Production process:
Our production strictly follow these procedures: Pleating → Seam welding → Assembly → Trimming → Welding → Finished products → Packaging
Clean Room:
In the purification workshop, workers need to wear purification clothes, purification shoes, masks, hats and gloves. The purification workshop has high requirements on the production environment, which can ensure the cleanliness and safety of the products, and can meet the filtration requirements of food and beverage, biopharmaceutical and other industries.
Pullner laboratory:
It is equipped with varieties of test facilities: Aperture distribution instrument, water single-pass test bench, scanning electro microscope, bacterial challenge lab, online particle detector, diaphragm test bench, air permeability tester, filter cartridge integrity tester, test trolley for simulating field conditions, etc. With several test experts, quickly provide customers varies conditions solutions.
Pullner Exhibitions:
We have participated in professional exhibitions in the filtration industry all the year round. At the exhibition, we not only met new customers and their product needs, but also gained more understanding of the latest filtration technology and products. For us to improve existing products and develop new Products provide more professional information.
1. Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer of all kinds of filter cartridges, housings and filtration systems. We provide you the total filtration solutions with our many years experience in the industry.
2. Q: May I have samples?
A: Sure, of course. Sample cost can be refunded if you place formal orders in the future.
3. Q: Can you make customized products?
A: Yes, of course. if you can provide us detailed specifications or drawings. Our mission is make customer idea on the products and provide the customer satisfied solutions.
4. Q: Can I use our own designed package?
A: Yes, size, color, logo and packaging style all can be customized.
5. Q: What's your MOQ?
A: Normally, 100PCS/item. Any trial order which is less than MOQ is warmly welcomed. If you have a trial order, please feel free to contact us so that we can make some shipping recommendation for you to save the cost based on the quantity you need.
6. Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customer is our goal. We would like to grow with you together.
7. Q: What is your general lead time?
A: Normally 5-7 working days for off-the-shelf samples and 10~15 days for bulk production.
8. Q: How should I pay you?
A: T/T, L/C, Western Union, MoneyGram, etc are acceptable.
9. Q: What certificate do you have?
A: Our factory is ISO9001/ISO14001/ISO45001 certified.
10. Q: How should I place an order?
A: Please kindly click "Sent Inquiry", Then our sales engineer will recommend you suitable products for your selection also give some valuable suggestion for your selection.
Product Tags:
|
|
Desalination SWRO Plant Pleated High Flow Filter Cartridge Beta 5000 5 Micron Images
|
